Figuring out the Ford Focus Power Steering Seal Pump Leak
A power steering fluid leak looks nothing like a major problem. It doesn’t leave you stranded in the middle of a busy road or a highway for that matter. A flat tyre or a broken down engine have more chances of doing so. But don’t let that fool you! The little inconvenience can turn into a major one, if left unattended.
What to Do When a Leak Appears:
The Ford Focus is a compact car which was great on space as a mid-sized sedan, I am sure you’d agree. But a power steering leak can be a major problem if left unattended. Getting someone to take a look at it, at a nearby station is probably the best solution. But what if the nearest station is miles and miles away? That would require you to take a look at it and take some action. So before we begin, park your car safe and keep a glove handy, of course!
Identify The Leak:
Ford Focus Power Steering seal pump leak can be evident while the car is moving and you could see leaked fluid on the ground. The location of the leak, the characteristics of the fluid, that is, its smell and colour are major giveaways when it comes to answering the question “What is my car leaking?” and power steering leakage is one of the more difficult ones to recognize. It is often confused with engine oil leak. To be sure, you can try to identify what fluid it is that your power steering is using. Intermittent or power steering failure might be the surest giveaway that the power steering fluid in the pump is low. This might be due to leakage. The fluids used in Ford Focus Ford Spec WSA-M2C-195-A. How would you know? The power steering pump is located at the bottom of the engine, near the steering column.
Fixing Loose Nuts On The Pump:
A few twists of a ratchet can fix the loose clamps which happen due to few loose nuts on the Ford Focus Power Steering Seal Pump caused by the vibrations from the engine. This can be an easy and quick fix. However, if the clamps are fine then we’ll have to check for hose damage.
Repairing or Replacing Damaged Hose:
If hoses in the power assembly have been damaged and say, they are cracked, then they need to be either repaired or replaced. Replacing old hose with new ones by loosening the clamps or if the crack is at the end of the hose, then cutting the end and reusing the rest can offer solution to the leakage problem. However, in case you need to change the fluid, you need to bleed the line for any air bubbles. You have to ensure that there are no air bubbles. You can do this by steering the car which would put pressure and bubble out any air that is inside. Of course, this is not a power steering seal pump leak on your Ford Focus but it is worth checking.
Checking on Steering Column Seals:
Rubber seals at the end of the steering column are a place where the fluid might be leaking from. These seals might need to be replaced or repaired or tightened as per requirement.
In order to stop your Ford Focus Power Steering seal pump leak from turning into big and expensive wreckage, there are plenty of options to repair the leak! One can use Steering Leak Stops available in the market or get it checked by the mechanic at the service station.
To learn about power steering rack seal kits, click the link!