How to Use a Power Steering Pump Rebuild Kit

Why would you opt to repair your power steering pump with the use of a power steering pump rebuild kit than to replace? The reason is that it’s very expensive to replace than to repair. If you own a vehicle, the major ordeal that you’d face is fluid flowing from your power steering pump. If you’ll notice your seals and gaskets have started to age and wear, or your hoses have spoiled, it’s obvious that you’ve got a leak on your vehicle. However, the good news is that today you can get a power steering pump reconstruct kit in the auto shop that’s near your house. You’ll save a lot of money through repair than replacement. Using the power steering pump repair kit is easy and you’d repair your power steering pump all by yourself. In this article, we’ll show you how you’d fix your vehicle using the power steering pump reconstruct kit:

Redoing your Gasket Seals

You’re going to use a power steering pump rebuild kit to change your gasket seals. First, you’ll have to make an observation to see where the leak is flowing from. You’d use a mirror and a torch to scrutinize for leaks in the power steering pump found underneath your car. If your vehicle is aged a bit you’d find the leak coming from the sealants that have dwindled for quite some time. You’ll mix the stop leak extra with the power steering fluid to help the sealants balloon and return back to their normal state. If you’d notice that your power steering pump still continues to leak even after repairing the sealants, you’ll opt to replace the gasket seals. You’ll remove the aged gasket and put another fresh one. However, when you’ll be buying the gasket, it’s good that you’d ensure to get the correct size.

Redoing the Force Hose

If you’ll notice the leak flowing from the spoiled hose, you’d require replacing it as fast as possible. You’d use a power steering pump rebuild kit to spray oil on the tips of the hose to make lose the bolts that’d usually lock it to the power steering pump. You’ll use a flare wrench to remove the bolts. Evacuate out the fluid from the power steering pump and put a steel drum underneath the hose to collect the aged fluid. Remove the new hose from your power steering pump reconstruct kit and you’ll replace the aged with a new hose. Fasten the bolts back to their original position using the flare wrench. Finally, you’ll replenish the vessel with fresh power steering fluid and after finishing, you’d start the engine of your vehicle so that you scrutinize if the leaks are still there.

The Tools You’ll Need

The tools you’d require together with the power steering pump rebuild kit are like: stop leak extra, flare wrench, steel drum, mirror, torch, and a power steering pump reconstruct kit which would comprise of seals, gaskets and hoses.

The Elements of a Power Steering Pump Reconstruct Kit

It’s very important that you should know the constituents of a power steering pump rebuild kit so that you’ll not get confused in the future. This will also help you to make a comparison from various traders and suppliers. These elements would include o- rings, gaskets, washers, sealants. However, there are some elements that will depend on the type of vehicles such as vanes, rollers, and slippers.

Interested in using a power steering sealer? Click the link to read more!